Canon imagerunner advance C5550i User Manual

Setting Up the Connection Using WPS Push Button
Mode
13WK-00C
If your wireless router supports the WPS (Wi-Fi Protected Setup) Push Button mode, you can easily set up a connection
with the WPS button on the router.
<Preferences> <Network> <Wireless LAN> <Wireless LAN Settings> <WPS Push
Button Mode> press and hold the WPS button on the wireless router
➠ When the wireless LAN router is detected and the conguration is complete, the screen <Connected.> will
be displayed.
● Depending on the networking device, you may need to press and hold the WPS button for 2 seconds or
longer. See the instruction manuals for your networking device for help.
● If the wireless router is set to use WEP authentication, you may not be able to set up connection using WPS.
Setting Up
26

Canon imagerunner advance C5550i Specifications

General

Type	Color Laser Multifunction Printer
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 6, 350 sheets
Hard Disk Drive	250 GB
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	Up to 50 ppm
Copy Speed	Up to 50 ppm (Letter)
Connectivity	USB, Ethernet, Wi-Fi
Display	10.1-inch TFT LCD WSVGA Color Touch Panel
Warm-up Time	Approximately 30 seconds
Memory	4 GB RAM
Fax Resolution	Up to 400 x 400 dpi
Dimensions	620 mm x 742 mm x 932 mm (W x D x H)