Enables the URL for a box with documents saved can be sent via e-mail or checked on the Remote UI
screen.
● Since there is no way to check a registered PIN, make sure that you write down the
PIN that you enter, and keep it in a safe place.
<Memory RX Inbox PIN>
<Function Settings> <Receive/Forward> <Common Settings> <Set Fax/I-Fax Inbox>
You can set a PIN for the Memory RX Inbox.
● Since there is no way to check a registered PIN, make sure that you write down the PIN that you
enter, and keep it in a safe place.
<Use Fax Memory Lock>
<Function Settings> <Receive/Forward> <Common Settings> <Set Fax/I-Fax Inbox>
You can select whether to save incoming faxes in the Memory RX Inbox of the machine without printing
(Memory Reception). This function enables you to check saved documents before printing or deleting them
from the Memory RX Inbox.
Saving Received Documents in the Machine (Memory Reception)(P. 354)
<Use I-Fax Memory Lock>
<Function Settings> <Receive/Forward> <Common Settings> <Set Fax/I-Fax Inbox>
You can select whether to save incoming I-faxes in the Memory RX Inbox of the machine without printing
(Memory Reception). This function enables you to check saved documents before printing or deleting them
from the Memory RX Inbox.
Saving Received Documents in the Machine (Memory Reception)(P. 354)
<Memory Lock Start Time>
<Function Settings> <Receive/Forward> <Common Settings> <Set Fax/I-Fax Inbox>
You can specify the time to activate the Memory Reception function. The machine will automatically switch to
the Memory Reception mode at the specied time.
Setting the Start Time for Memory Reception
1
Press .
2
Press <Function Settings> <Receive/Forward> <Common Settings>.
3
Press <Set Fax/I-Fax Inbox>.
4
Press <Memory Lock Start Time>, and specify the required settings.
Settings/Registration
793
To Next Page
Loading...
Need help?
General
