Chapter 1
1-2
1.2.2 Printhead
0013-2741
The printhead that mounts on the carriage is an integrated six-color disposable printhead.
It has 5,120 nozzles for MBK and 2,560 nozzles for each additional color arranged in a zigzag pattern.
If print quality remains unimproved even after a specified cleaning operation, replace the printhead. Replacement about one year after the date of initial unpacking
is also recommended.
F-1-2
1.2.3 Ink tanks
0013-0607
Ink tanks are disposable.
An ink tank should be replaced when an ink tank replacement prompt message appears or when six months expire after the date of initial unpacking, whichever
occurs earlier.
To install ink tanks, open the right cover of the printer. Ink tanks are furnished with a notch for preventing incorrect installation, which will allow the tanks to be
installed at the position marked in the right color and nowhere else.
Ink tanks are available in the four dye ink colors of black, cyan, magenta and yellow and the pigment ink color of mat black.
F-1-3
1.2.4 Cutter unit
0013-5146
The cutter unit that mounts on the carriage is disposable.
Replace the cutter unit when it gets dull.
F-1-4
1.2.5 Roll holder
0013-4667
The printer comes with a roll holder for paper tubes having an inside diameter of 2 inches as standard. It supports an optional roller holder for paper tubes having
an inside diameter of 3 inches.
Both roll holders clamp the paper tubes of roll media with an outside diameter of 150 mm or less from inside.
F-1-5
To Next Page
Loading...
