Canon iR3300 User Manual

Changing the Current Standard Settings
3-10
3-103-10
3-10
Changing the Current Standard Settings
Changing the Current Standard SettingsChanging the Current Standard Settings
Changing the Current Standard Settings
Standard Settings refers to a combination of Copy modes that the machine automatically sets after
the power is turned on or when is pressed. The standard settings can be changed to suit your
needs, or be returned to the default settings.
NOTE
•
••
•
The default settings are as follows:
- Copy quantity: 1
- Paper selection: Automatic Paper Selection
- Exposure/ Image quality: A
- Copy Ratio: 1:1 (100%)
- Copy function: 1 1-sided copy
Storing New Standard Settings for Copying
Storing New Standard Settings for CopyingStoring New Standard Settings for Copying
Storing New Standard Settings for Copying
To store copy settings as Standard Settings, you need to specify the settings you wish to store from
the Basic Features screen and/or Special Features screen, and then follow the procedure below.
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
2
22
2
Press [Store].
Press [Store].Press [Store].
Press [Store].

Canon iR3300 Specifications

General

Type	Digital Multifunction Imaging System
Print Speed	33 ppm
Copy Resolution	600 x 600 dpi
First Copy Time	4.9 seconds
Warm-up Time	30 seconds
Zoom Range	25% - 400%
Functions	Copy, Print, Scan
Paper Sizes	A3, A4, A5, B4, B5
Duplexing	Automatic
Memory	128 MB
Hard Disk Drive	Optional
Interface	USB, Ethernet
Power Consumption	1.5 kW
Dimensions	565 x 700 x 761 mm