Canon MF5770 - ImageCLASS B/W Laser - Printer Settings; Timer Settings

PRINTER SETTINGS
1. ERROR TIME OUT Sets the length of time before the machine returns an error when
no data is received from the computer.
ON The error time out is on. Sets the time out period.
5SEC to 300SEC (15SEC)
OFF The error time out is off.
TIMER SETTINGS
1. DATE/TIME SETTING* Sets the current date and time.
2. DATE SETUP*
3. AUTO CLEAR
ON
OFF
4. ENERGY SAVER
ON
OFF
5. SUMMER TIME
ON
1. BEGIN DATE/TIME
2. END DATE/TIME
OFF
* Only for the MF5750/MF5770 models.
year, month, day, hour, minute
Selects the format of the date displayed in the LCD.
DD/MM YYYY, YYYY MM/DD, MM/DD/YYYY
Sets the auto clear function. If the machine remains idle for a set
amount of time, the display returns to the standby mode.
Sets the time until the machine returns to the standby mode.
1MIN. to 9MIN. (1MIN.)
The auto clear function is turned off.
Sets the energy saver mode.
Sets the time until the machine enters the energy saver mode.
3MIN. to 30MIN. (5MIN.)
The auto energy saver function is turned off.
Sets the summer time.
The summer time setting is enabled.
Sets the MONTH, WEEK, and DAY when the summer time
starts.
Sets the MONTH, WEEK, and DAY when the summer time ends.
The summer time setting is disabled.
(The factory default setting is in bold face.)
P_
d_
O3
G)
.C:
O
10-5