To Next PageTo Next PageWhy my Canon Camcorder will not turn on?
If your Canon Camcorder isn't turning on, it might be due to an exhausted battery pack. Try replacing or charging the battery. Another possibility is that the battery pack isn't correctly attached, so ensure it is properly connected.
Why does my Canon MV600 switch off by itself?
If your Canon Camcorder is switching off by itself, the battery pack may be exhausted; in this case, replace or charge the battery pack. Alternatively, the power save function may have been activated; try turning the camcorder back on.
How to fix Canon MV600 Camcorder will not focus?
If your Canon Camcorder will not focus, it might be because autofocus doesn't work on that subject, so try focusing manually. Another possibility is that the viewfinder isn't adjusted; adjust it with the diopter adjustment lever. Also, a dirty lens can cause focusing issues, so clean the lens.
Why does Canon MV600 Camcorder turn off by itself?
If your Canon Camcorder is switching off by itself, the battery pack may be exhausted; in this case, replace or charge the battery pack. Alternatively, the power save function may have been activated; try turning the camcorder back on.
What to do if buttons will not work on Canon MV600?
If the buttons on your Canon Camcorder aren't working, it could be because the camcorder isn't turned on, so ensure the camcorder is powered on. Another reason could be that a cassette isn't loaded; try loading a cassette. Also, check the battery pack; if it's exhausted, replace or charge it.
What to do if cassette compartment will not open on Canon MV600?
If the cassette compartment on your Canon Camcorder won't open, it could be due to an exhausted battery pack; try replacing or charging it. Also, make sure the cassette compartment cover is fully open.
Why pressing the playback button does not start playback on Canon MV600 Camcorder?
If pressing the playback button on your Canon Camcorder doesn't start playback, ensure the camcorder is turned on and set to PLAY (VCR) mode. Also, make sure a cassette is loaded.
Why LCD/viewfinder switches on and off on Canon MV600?
If the LCD or viewfinder on your Canon Camcorder is switching on and off, the battery pack may be exhausted. Try replacing or charging the battery pack.
What to do if cassette compartment stopped during loading/unloading on Canon MV600 Camcorder?
If the cassette compartment stopped during loading/unloading on your Canon Camcorder, it could be because the battery pack is exhausted. Replace or charge the battery pack. If that doesn't solve the issue, the camcorder may be malfunctioning.
What to do if tape reached the end on Canon MV600?
If the tape reached the end on your Canon Camcorder (and it flashes on the screen), rewind the tape or replace the cassette.
General| Sensor type | CCD |
|---|---|
| Total megapixels | 0.8 MP |
| Optical sensor size | 1/6 \ |
| Digital zoom | 360 x |
| Optical zoom | 18 x |
| Display diagonal | 2.5 \ |
| Operating temperature (T-T) | 5 - 35 °C |
| Camcorder tape type | Mini-DV |
| Viewfinder screen size | 0.33 \ |
| DV port | Yes |
| S-Video out | No |
Weight and Dimensions| Depth | 103 mm |
|---|---|
| Width | 58 mm |
| Height | 147 mm |
| Weight | 520 g |
Essential safety and operational warnings for using the camcorder.
Instructions on powering the camcorder using the AC adapter.
Step-by-step guide to recording video footage onto a tape.
Steps for playing back recorded video from a cassette tape.
How to navigate and use the camcorder's menu system to adjust settings.
Copying recordings to a VCR or digital device.
