Canon MV901 - Selecting an Effect

53
Advanced Functions Recording
E
Fade out: During recording, press the D.EFFECTS button and pause
recording by pressing the start/stop button.
The fader can be activated/deactivated by pressing the D.EFFECTS button.
:
4. Fade in: In playback pause mode, press the
D.EFFECTS button and begin playback by pushing
the joystick ( ) towards / .
Fade out: During playback, press the D.EFFECTS
button and pause playback by pushing the joystick
( ) towards / .
The fader can be activated/deactivated by pressing the D.EFFECTS button.
Selecting an Effect
In mode, set the program selector to .
* Not available if the TV type is set to [NORMAL TV].
1. Open the FUNC. menu and select ( ) the digital
effects icon.
2. Select ( ) the [EFFECT] option and press ( ).
3. Select ( ) a setting option, press ( ) and close
the menu.
The symbol of the selected effect will appear on screen.
4. Press the D.EFFECTS button.
• The symbol of the selected effect will turn green.
• The effect can be activated/deactivated by pressing the
D.EFFECTS button.
 Turn off the digital effect when you do not use it.
 The camcorder retains the setting even if you turn it off or change the recording
program.
 The image quality may be slightly lower with digital effects.
 Digital effects cannot be used in the following cases:
- When the program selector is set to .
- During DV dubbing.
MENU
( 33)
D.EFFECT OFF
*
Downloaded From VideoCamera-Manual.com Manuals