Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Software Starter Guide

Starting ImageBrowser60
Starting ImageBrowser
Begin by starting up ImageBrowser. The startup procedures vary according to
whether you are connecting the camera to the computer or using a memory
card reader.
Camera to Computer Connection
Mac OS X
1 Attach the supplied USB cable to the computer’s USB port and the
camera’s Digital Terminal. Prepare the camera for communication
with the computer.
iPhoto or Image Capture will automatically start when the camera and
computer are ready to connect. If either of these programs does not start,
proceed to Step 3.
2 Click at the upper left of the iPhoto or Image Capture window to
close it.
3 Double-click the [Canon ImageBrowser] icon on the
desktop.
If the Canon ImageBrowser icon does not appear on the
desktop, double-click the [Canon Utilities] folder on the
drive on which the program was installed, followed by the [ImageBrowser]
folder and [ImageBrowser] icon.
4 Click [Canon Camera] in the Explorer View section.
The Communication Settings dialog will display.
This dialog will only appear for the first connection.
Procedures for attaching the camera to the computer and
placing it in the correct mode for connecting vary between
camera models. See Information about Your Camera (p. 105)
for details.
Explorer View Section

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English