(Signal strength: 81 % or more): You can use the printer over a wireless LAN without any
problems.
(Signal strength: 51 % or more): The problem such as the printer cannot print may occur
according to the network status. We recommends placing the printer near the wireless router.
(Signal strength: 50 % or less): The problem such as the printer cannot print may occur.
Place the printer near the wireless router.
Wireless LAN is enabled but the printer is not connected to the wireless router.
Wireless Direct is enabled.
Wireless LAN is disabled.
F. Setup
Displays the printer's setting menus or the maintenance menus.
G. Quick guide
Displays the guides how to loading paper or how to replace the FINE cartridge, or the
troubleshooting.
148
To Next Page
Loading...
