The confirmation screen will appear.
7.
Select Yes.
The printer starts cleaning the print head deeply.
Do not perform any other operations until the printer completes the deep cleaning of the print head. This
takes about 1 to 2 minutes.
The pattern print confirmation screen will appear.
8.
Select Yes.
The nozzle check pattern will be printed.
9.
When the completion message appears, select OK.
10.
Examine the nozzle check pattern.
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.
If the problem is still not resolved, replace the FINE cartridge with a new one.
If the problem is still not resolved after replacing the FINE cartridge, contact your nearest Canon service
center to request a repair.
96
To Next Page
Loading...
