[Date and Time] Setting Date and Time
45
Setting Page
3
Note
• If [Synchronize with computer time] is selected, after clicking
[Apply], [Setting Method] will change to [Set manually].
• If [Synchronize with NTP server] is selected and the IP address
of the NTP server is incorrect or a connection with the NTP
server cannot otherwise be established, the date and time will
not be changed.
• The NTP server query interval is 300 seconds. Synchronization
will take time if the time difference is large.
• The camera's NTP broadcast mode does not support IPv6.
• If the [Time Zone] setting is changed, the date and time
display will update automatically according to the specified
time zone.
To Next Page
Loading...
