Canon VM-E70 - ASSEMBLY EDITING; Procedure for Assembly Editing

ASSEMBLY EDITING
The VM-E70 automatically edits the tape for noise-free transitions between takes as
long as the video cassette remains loaded. If recording stops by turning VM-E70 off,
if battery charge is used completely or if video cassette is unloaded, assembly editing
is necessary to eliminate noise.
Press the stop button, then press the
play button.
Turn VM-E70 on and press the start
button to start recording.
At the point where the new recording
will begin, press the still button, then
turn VM-E70 off.
1