Canon VM-E70 - IF USING A POWER ADAPTER; Connecting the Power Adapter; Removing the Charge Coupler; Power Adapter Notes

IF USING A POWER ADAPTER
2 Connect adapter cable to adapter
terminal of either compact power
adapter or car battery adapter. Con¬
nect power cord to power source.
v— _ j
* If usiny car haitery adapter, be sure to start car's en¬
gine be-lore connecting power cord to cigarette lighter
socket
* Clip adapter cable to grip Im;Ii.
Refer to adapter instruction manual for further infor¬
mation regarding use.
When using the CA-E7 in certain situations,
for example, if you are in an area far from
TV stations and receiving conditions are
relatively bad, noise may appear on the TV
screen.
If this occurs, move the CA-E7 away from
the TV, to eliminate noise.