Canon WFT-E8 User Manual

116
Function Settings Screen
[Power saving]
 FTP Trans.
When [Enable] is set, if no image is transferred for a certain period
of time, the transmitter will log off from the FTP server and stop the
LAN. When the transmitter is ready for image transfer, the
connection is re-established automatically.
 EOSUtility/WFTserver/Smartphone
If no communication is established for a certain period of time, the
transmission rate drops to save power. Note that the camera
responds as follows regardless of the [Power saving] setting.
• When a connection is established with [Easy connection], the
power saving function is disabled.
• When a connection is established using an access point, the
power saving function is enabled.
 LinkedShot
The power saving function is disabled regardless of the setting.
[MAC address]
The MAC address of the transmitter can be checked. The MAC address
of the transmitter is displayed in [Wireless].

Canon WFT-E8 Specifications

General

Brand	Canon
Model	WFT-E8
Category	Transmitter
Language	English