Canton Smart Connect 5.1 Quick Guide

38
English
Play Mode PURE DIRECT Source correct reproduction without
the use of a virtualizer or upmixer
Bluetooth
®
BTP Bluetooth
®
pairing mode
Bluetooth
®
BT- / CON Connection established
Bluetooth
®
BT- / DIS Connection disconnected or interrupted
Bluetooth
®
FAI Failure occurred during pairing process
Incoming signal DOLBY ATMOS Dolby Atmos
®
bitstream
Incoming signal DOLBY DIGITAL Dolby
®
Digital multichannel bitstream
Incoming signal DOLBY DIGITAL
2.0
Dolby
®
Digital two-channel bitstream
Incoming signal DTS HD DTS-HD
®
bitstream
Incoming signal DTS DTS
®
Digital Surround
TM
bitstream
Incoming signal PCM Digital stereo signal
Networking CAST Usage of Chromecast built-in technology
Networking SPOTIFY Usage of Spotify Connect technology
Networking AIRPLAY Usage of AirPlay technology
Network setup NET / SET Connect 5.1 ready for network connection
Network setup WIF / CON Wireless network (WLAN) connected
Network setup WIF / DIS Wireless network (WLAN) disconnected
Network setup ETH / CON Network (Ethernet) connected
Network setup ETH / DIS Network (Ethernet) disconnected
Note:
• Further displays can be found in the detailed operating instructions.
These can be found at: www.canton.de/manual/connect5.1

Canton Smart Connect 5.1 Specifications

General

Control type	Touch
Product color	Black
Audio decoders	DTS, Dolby Digital
Built-in display	Yes
Bluetooth version	4.0
Display technology	LED
Cables included	AC
Power consumption (economy mode)	0.46 W
HDMI input ports quantity	3
HDMI output ports quantity	1

Weight and Dimensions

Depth	140 mm
Width	245 mm
Height	52 mm
Weight	1230 g