Canton Smart Connect 5.1 Quick Guide

3
49
English
Note:
• To delete a playlist and/or the settings from a preset button, please press
and hold the relating button for 10 seconds until the corresponding preset
[P1], [P2] or [P3] is shown in the display rapidly flashing.
AUTOMATIC UPDATES
After you have connected the Smart Connect 5.1 to the network, firmware
updates are executed automatically. After each connection to the power
supply and at regular intervals (also in standby mode), the Connect 5.1
searches for an update and installs this, if available. The LED flashes green/red
during the update and the display first shows „DOWNLOADING“, then
„UPDATING“. During this time the Smart Connect 5.1 is not operable.
To do this, the Smart Connect 5.1 must have been connected to the network
router via the Google Home app or an iOS device (by use of WLAN) or
alternatively by a network cable (by use of LAN).
Attention:
• Do NOT disconnect the Smart Connect 5.1 from the power supply during
an update process!
Note:
• The Connect 5.1 contains a multitude of other great functions. All settings
can be found in the detailed instruction manual. This can be found under:
www.canton.de/manual/connect5.1

Canton Smart Connect 5.1 Specifications

General

Control type	Touch
Product color	Black
Audio decoders	DTS, Dolby Digital
Built-in display	Yes
Bluetooth version	4.0
Display technology	LED
Cables included	AC
Power consumption (economy mode)	0.46 W
HDMI input ports quantity	3
HDMI output ports quantity	1

Weight and Dimensions

Depth	140 mm
Width	245 mm
Height	52 mm
Weight	1230 g