Canton Smart Soundbar 9 User Manual (English)

Other manuals for Canton Smart Soundbar 9

Questions and Answers:

F
fmooneyAug 22, 2025
What to do if my Canton Smart Soundbar 9 Speaker System has no sound?
- T
  Tina TuckerAug 22, 2025
  If your Canton Speaker System has no sound, several factors could be at play. First, the sound format selected on your source device may be incorrect, so verify those settings. Next, there might be no signal coming from the player. Ensure the digital output on the source device is unlocked and the volume isn't set to zero. Also, check the cable connections between the player and the Soundbar 9, replacing the cable if necessary. Finally, ensure that the protective caps on the connectors of the optical cable are removed.
D
davidhodgesSep 2, 2025
How do I fix a Canton Speaker System Soundbar 9 that doesn't change inputs automatically?
- A
  albert19Sep 2, 2025
  If your Canton Soundbar 9 isn't automatically changing inputs, the source device on the coaxial or optical digital input might not be switched off, or it doesn't switch off its S/PDIF transmitter in standby mode. To resolve this, switch off or disconnect the source device from the mains. Also, if the signal at the AUX (Line) input is too low, increase the output level on your source device.
D
David OchoaSep 1, 2025
What to do if Canton Smart Soundbar 9 Soundbar 9 does not turn off automatically?
- A
  Andrew HardingSep 1, 2025
  If your Canton Soundbar 9 doesn't turn off automatically, it might be because the standby function MAN is activated. Try activating the standby function ECO, AUT, LAN, or NSB instead. If AUT or NSB is activated and the source device transmits a carrier signal in standby mode (optical or coaxial digital input), disconnect the source device from the mains or manually switch off the Soundbar 9.
E
Edward DonaldsonAug 31, 2025
Why doesn't my Canton Smart Soundbar 9 Soundbar 9 turn on automatically?
- D
  Drew KaiserAug 31, 2025
  If your Canton Soundbar 9 isn't turning on automatically, the standby function may be set to NSB, requiring manual power on; switch it to AUT. Alternatively, the device might have been switched off via the remote or TV remote (if using IR learning). Switch it on via the Soundbar 9 remote and wait for it to enter standby next time. To prevent the TV remote from turning it off, delete the “Power” button command from the Soundbar 9. Also, if the signal at the AUX (Line) input is too low, increase the output level on your source device.
J
Joseph BairdAug 28, 2025
Why does my Canton Smart Soundbar 9 Soundbar 9 switch off automatically?
- N
  Natalie BushAug 28, 2025
  If your Canton Soundbar 9 is switching off automatically, it might be due to the standby function being activated (ECO, AUT, LAN, or NSB). To prevent this, select the standby function MAN. Also, the infrared command for Standby may have been learned incorrectly. In this case, relearn the infrared command for Standby.
M
Michael CarlsonAug 27, 2025
How to increase the volume on my Canton Smart Soundbar 9 Soundbar 9 if the sound reproduction is too soft?
- N
  Nicole RoseAug 27, 2025
  If the sound reproduction on your Canton Speaker System Soundbar 9 is too soft, increase the volume using the “Volume” button, and also increase the volume of the source device. Also, ensure that the maximum possible volume hasn't been limited by the “Volume” function (VOL); if it has, increase the maximum possible volume according to the instructions.
S
Stacey BrightAug 27, 2025
What to do if Canton Smart Soundbar 9 Speaker System Soundbar 9 does not turn on?
- D
  Daniel NicholsAug 27, 2025
  If your Canton Speaker System Soundbar 9 doesn't turn on, make sure the mains cable is properly connected to both the power outlet and the Soundbar 9.
M
Michael WernerAug 25, 2025
Why is there no playback via Bluetooth on my Canton Speaker System?
- A
  Anna MasonAug 26, 2025
  If you're experiencing no playback via Bluetooth on your Canton Speaker System, there could be several reasons: * Ensure there is a connection between the Soundbar 9 and your mobile device. * If the device is paired but not playing, try reconnecting it. * Set the volume on your mobile device to the maximum. * Increase the volume on the Soundbar 9. * Ensure that there are no sources of interference (such as a WiFi router or laptop) near the Soundbar 9. * If you're using both WiFi and Bluetooth from a mobile device, disable WiFi or reduce the distance between the Soundbar and the mobile device.
P
Patricia BryantAug 25, 2025
How to fix a Canton Speaker System Soundbar 9 that doesn't respond to the remote?
- C
  crystal46Aug 25, 2025
  If your Canton Soundbar 9 isn't responding to the remote control, first, ensure you've removed the protective film from the remote. If that doesn't work, replace the battery, making sure to insert it with the correct polarity.

Canton Smart Soundbar 9 Specifications

General

Audio decoders	DTS Digital Surround, DTS TruSurround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Tweeter diameter	19 mm
Mid-range driver diameter	50 mm
Tweeter diameter (imperial)	0.75 \
Mid-range driver diameter (imperial)	2 \
Subwoofer type	Passive subwoofer
Cables included	AC, Audio (3.5mm), Coaxial, HDMI, Optical
Receiver included	No
Display type	LED
Certification	CE
Product color	Black
HDMI in	3
HDCP version	2.2
Bluetooth version	4.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Bluetooth range	10 m
Bluetooth profiles	A2DP
Transmission frequency	2.4 GHz
Apple docking compatibility	Not supported
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Soundbar power consumption	150 W
Power consumption (standby)	0.4 W