User Manual
Page 18 of 95
2.6 ELECTRIC AND MECHANIC SAFETY
Maintain all CAPENERGY devices panels and covers closed. The removal of panels or
covers may create hazardous situations.
Inside the device, possibly dangerous high voltages are active. Panels or covers should
not be removed by any personnel other than the authorized technical services.
Never leave a CAPENERGY device on, open or unattended during maintenance.
CAPENERGY devices are heavy and may cause injuries when they are not manipulated
with sufficient care.
The device is earthed by means of the earth conductor of the network cable. Do not ever
connect the device to an installation without a residual-current circuit-breaker.
WARNING: To avoid electric shocks, this device should be connected only to a power
network equipped with an earth conductor.
When using the device it must be located in such a way that the connector of the mains
cord can be easily reached to disconnect it if it is necessary.
To Next Page