User Manual
Page 20 of 95
2.9 MOVING THE DEVICE
All products pertaining to the CAPENERGY product range are equipped with a base on
wheels which allows to easily move the device around, and with breaks allowing to
secure the device.
Before moving any device, make sure all the cables and accessories have correctly been
gathered together and put away in the accessory tray that hangs from the base.
Move the device carefully to avoid obstacles hitting the base.
2.10 CONSIDERATION ON ELECTROMAGNETIC
COMPATIBILITY
The devices pertaining to the CAPENERGY product range: C400, C300, C200, C100,
C50 and C500, require special precautions with regard to electromagnetic compatibility
and need to be installed and used according to the electromagnetic compatibility needs
detailed in this manual.
See annex F for indications and precautions.
2.11 PRECAUTION: DEVICE HEATING DURING USE
When using the device for a long period of time, the upper cover may start heating and
reach temperatures higher than 48ºC.
Safety warning
In case it is necessary to move the CIM 300 or CIM 400, remove all the
accessories and put them away in the accessory tray that hangs from the
base before moving the device.
Safety warning
The upper cover of the device should not be touched for longer than a
minute.
To Next Page