User Manual
Page 37 of 95
Temperature control
Fixed values are established for the treatment time, temperature and working frequency.
There are three options (see table):
Treatment time:
10 minutes
Prefixed temperature: 37ºC
Athermal
Working frequency:
0,8 MHz
Treatment time: 15 minutes
Prefixed temperature: 39ºC
Moderate
thermal
Working frequency: 1,0 MHz
Treatment time: 20 minutes
Prefixed temperature: 41ºC
TEMPERATURE
CONTROL
Frankly thermal
Working frequency: 1,2 MHz
Table 4.5. Treatment parameters in case of control by temperature.
The device automatically regulates the power output necessary to obtain and maintain
the prefixed temperature as detected by the sensor of the active accessory.
This option will be activated only in those channels that have accessories equipped with
a temperature sensor. Channels with sensor-less accessories will be configured
according to the parameters of the INDICATION CONTROL mode.
4.5.- CONFIGURATION
Allows the selection of the desired language for the menu texts.
Spanish
English
To Next Page