Caple C816C - Page 18

Instruction manual C816C
18
Please keep this instruction manual for future reference
SETTING THE TIMER TO TURN ONE OR MORE COOKING ZONES OFF
NOTE:
If you want to change the time after the timer is set, you have to start from step 1.
USING THE TIMER AS A MINUTE MINDER,
WHEN YOU ARE NOT SELECTING ANY COOKING ZONE
Touch the or power setting for the
corresponding cooking zone you want to set the
timer for.
Set the time by touching the control for the timer
If you touch the
or control of the timer once,
the time will decrease or increase by 1 minute.
If you touch the
and together, this will cancel
the timer and it will display ” --” in the minute
display.
If you touch the and together, this will cancel
the timer and it will display ” --” in the minute
display.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
The red dot next to the power level indicator will
illuminate, indicating that zone is selected.
When the cooking timer expires, the corresponding
cooking zone will switch off automatically.