EasyManua.ls Logo

Caple C886G - Installation Instructions

Caple C886G
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Instruction manual C886G, C887G & C889G Please keep this instruction manual for future reference
If, despite all of these checks, the hob does not function properly and problems persist, call our
Caple Service department for help:
T - 0117 938 7420
E - service@caple.co.uk
INSTALLATION INSTRUCTIONS
Installation should only be attempted by a qualified installer so that the installation and
maintenance procedures may be followed in the most professional and expert manner possible.
IMPORTANT:
Unplug the electrical connection before performing any maintenance or regulation upkeep work.
POSITIONING FOR GAS HOB
IMPORTANT:
This unit may be installed and used only in permanently ventilated rooms according to British
standards.
The following requirements must be observed:
The room must be fitted with a ventilation system which vents smoke and gases from
combustion to the outside. This must be done by means of a hood or electric ventilator that
turns on automatically each time the hood is operated.
The room must also allow for the influx of the air needed for proper combustion. The flow of
air for combustion purposes must, not be less than 2m³/h per kW of installed capacity. The
supply of said air can be effected by means of direct influx from the outside through a duct
with an inner cross section of at least 100cm² which must not be able to be accidentally
blocked.
Intensive and prolonged use of the appliance may necessitate supplemental ventilation, e.g.
opening a window or increasing the power of the air intake system (if present).

Related product manuals