Caple CR 9207 - Fitting and Levelling the Cooker (Model CR 9207)

9
The adjustable feet must be fitted
to the base of the cooker before
use.
Rest the rear of the cooker on a
piece of the polystyrene packaging
exposing the base for the fitting of
the feet.
Fit the 4 legs by screwing them
tight into the support base as
shown in picture 2.3.
Levelling the cooker
The cooker may be levelled by
screwing the lower ends of the feet
IN or OUT (fig. 2.4).
Fig. 2.2
Fig. 2.3
Fig. 2.4
Fitting the adjustable feet and levelling the cooker - Model CR 9207