Cardinal 748 - Page 24

23
PRINTER TAB SETTINGS
TAB SETTING (General Format Information)
Press and the display will show no. If you wish to
program or review the location of the printed data on the
ticket, press the key to change the display to YES.
Otherwise leave the display at no and press the key to bypass these
settings. If YES, press the key to continue the Printer Tab settings. If no,
advance to
CALIBRATION “C” NUMBERS or to CALdAC if the option board is
installed (see CALIBRATION OF THE ANALOG OUTPUT).
The general format for the input is A = YY.XX where A is the
character identifying the data printed, YY is the number of lines
down and XX is the number of spaces to the right.
NOTE! Enter 00 in either location, YY or XX, to disable the
data from printing.
tAbS?
ENTER
ENTER
1
ENTER
Printed Data
XX
YY
TEMPORARY TRUCK TABBING (if trSto= YES)
Time (Clock) Location
Date Location
ID Location
Gross Weight Location
This display shows the current setting of the time (clock).
Use the numeric keys to enter the new location then press
to save it or to save the current setting.
This display shows the current position of the date. If you
do not wish to change it, press the key, otherwise use
the numeric keys and enter the desired value, then press
the key.
This display shows the current position of the identification.
If you do not wish to change it, press the key,
otherwise use the numeric keys and enter the desired
value, then press the key.
This display shows the current position of the gross weight.
If you do not wish to change it, press the key,
otherwise use the numeric keys and enter the desired
value, then press the key.
ENTER
ENTER
C+1.01
d+2.01
1+3.01
G+4.01
ENTER
ENTER
ENTER
ENTER
ENTER