758S PARTS IDENTIFICATION
ITEM PART NO. QTY DESCRIPTION
2 6013-0039 1 NUT HEX #6-32
3 6021-1142 9 SCW ROUND HEAD #10-32 x 0.625 RHMS
4 6021-1143 1 SCW FILLISTER #10-32 x .625 S.S.
5 6024-0083 2 WASHER FLAT 3/16 NEOPRENE, 70 DURO.
6 6024-1081 10 WASHER FLAT #10 NEOPRENE BACKING S.S.
7 6540-1004 4 RUBBER FOOT
8 6540-1053 2 ENCLOSURE KNOB 1.25 DIA., 10-32 INSERT
9 6650-0087 1 LABEL: MADE IN USA
10 6680-0004 1 WASHER LOCK INT. TOOTH #6 Z/P
11 6680-1008 2 SPACER #10 x .155
12 8555-D066-0A 1 ASSEMBLY: ENCLOSURE, REAR
13 8555-D067-0A 1 ASSEMBLY: ENCLOSURE, FRONT
14 8558-D010-08 1 GIMBAL FOR 708 / 758S
15 8555-C063-0A 1 BEZEL FOR 758S
16 8555-D031-1A 1
BOARD ASSEMBLY - 758 *
17 8555-D055-08 1 758S KEYPAD
18 8555-B064-08 1 GASKET FOR 758S ENCLOSURE
19 8555-C050-0A 1
POWER SUPPLY BOARD ASSEMBLY *
20 8555-C060-0A 1 ENCLOSURE FRONT
21 8555-B053-0A 1 ASSEMBLY CABLE, CALIBRATION SWITCH
22 8555-B062-08 1 CALIBRATION SWITCH BRACKET
8555-B051-0A 1
POWER CABLE **
8555-B052-0A 1
LOAD CELL CABLE **
¬
Refer to Figure No. 13 for a additional view of part location.
¬¬
Not shown in Figure No. 20. Refer to Figure No. 13 for part location.
22
To Next Page
Loading...
