Cardo Systems FREECOM 4+ User Manual

4. RIDING WITH OTHERS
4.1 BLUETOOTH INTERCOM
To connect your unit to another unit with a Bluetooth intercom, such as a Cardo Bluetooth unit or other Bluetooth-
enabled devices, you must first pair their channels. Once paired, the units automatically recognize each other
whenever they are in range (line of sight up to 1.2 km / 3,900 ft subject to terrain).
● Pairing a channel replaces any existing paired unit on that channel with the new unit.
● If you purchased the FREECOM 4+ DUO, the retail package contains two pre-paired units.
● The Intercom range with other models is limited to the distance of the unit with the shorter range.
4.2 SETTING UP BLUETOOTH INTERCOM GROUPS
You can use your FREECOM 4+ to create or join a Bluetooth group. The participating riders are connected in a
chain with a maximum total of four riders.
To set up a Bluetooth group:
1. Confirm your unit is in Standby mode (LED flashes blue slowly).
2. To initiate 2-way pairing:
● On your unit, press for 5 seconds to enter pairing mode.
The LED flashes red.
● The following announcement is heard: Rider A pairing.
Bluetooth intercom pairing needs to be initiated on the other device.
The unit confirms that pairing has succeeded.
3. To add a 3rd rider:
● Press for 5 seconds. The LED flashes red.
● Tap 2 times. The LEDflashes blue.
The following announcement is heard: Rider B pairing.
12

Cardo Systems FREECOM 4+ Specifications

General

Brand	Cardo Systems
Model	FREECOM 4+
Category	Intercom System
Language	English