Carel boss - COMPLETING INSTALLATION; Quick configuration wizard

8
+040000260 - 1.0 - 22.09.2017
ENG
3. COMPLETING INSTALLATION
3.1 Quick conguration wizard
A simple procedure is available under the Congurazione Æ Setup Wizard menu to set the basic settings
of boss, divided into five steps.
Fig. 3.a
Nota: To no longer display the Quick configuration wizard when starting, select the corresponding flag;
to start the guided procedure click Start, while to exit the procedure, click Exit.
The following steps comprise simple system setup:
• Site information
• Line configuration
• Alarm management and I/O configuration
• HACCP report configuration
• guardian configuration.
1. Site information
First step: insert plant name (see Mask on side)