21
+040000260 - 1.0 - 22.09.2017
ENG
8. Under Activities Æ Activity scheduler Æ Rules Æ
Add enter the name of the rule (e.g.: “Daily power
consumption report”).
9. Choose the time band in which the action will be
performed (e.g.: “Every morning”).
10. Choose the action (e.g.: “Power consumption report”)
11. Enable the rule
12. Click Save: the new rule is added to the list.
13. Restart the engine.
4.4 Site calendar
By accessing Activities Æ Site calendar groups of instruments can be defined for control and setting
scheduled activities together.
1. Click “Groups”, also “ª Add“ to create a new group
2. Insert group-name, specify the command-
category and select the devices to include in the
group.
3. under Activities Æ Activity scheduler Æ
Scheduler select the category being configured
and Standard to set weekly scheduling.
4. clic for the day and the group being
configured.
5. in the window enter the activation time band
and any value to be set for the entire group.
6. Repeat the operation for all the time bands in
each group for each day of the week.
7. When configuration has been completed click
Save.
Note: set the same configuration for other days of
the week, click
on the “source” day an on the
“target” days.
Note: to configure a special schedule for an
individual day, under Activities Æ Activity scheduler
Æ Scheduler Exceptions indicate the special day and
then complete the configuration.
To Next Page
Loading...
