Carel boss - Defining Access Profiles and Users

15
+040000260 - 1.0 - 22.09.2017
ENG
5. Click Propagate: a window is displayed for
choosing the devices to propagate the values to.
6. Choose the devices and click Set: the new values
are propagated.
Note: “***” indicates that the value cannot be read.
Note: if the text box is empty, the value on the
device remains unvaried.
Note: To propagate all parameters to devices of
the same model, first click Copy and then Propagate.
Note: To print the conguration parameters:
under Report Æ Commissioning report, add the
variables to be printed for each model. Click Print.
3.7 Dening access proles and users
Each user accessing boss requires a user account. Users belonging to a certain profile will have access to
specific functions (read-only or read/write) and a specific group of devices.
It’s recommended to use the default User, Service and Installer profiles provided.
To configure a new account, proceed as follows:
1. Under Users conguration open the Users page.
2. Add
3. Enter the user name.
4. Assign one of the existing profiles.
5. Enter the password.
6. Click Save: the user is added to the list.
Nota: If necessary, to customise the profiles enter
Conguration Æ User conguration Æ Proles and
dene a new prole.