Carel boss - Displaying device details

11
+040000260 - 1.0 - 22.09.2017
ENG
3.3 Customising device conguration
Standard online CAREL devices are preset. Default settings include alarm management, logs, and variables
to be monitored on the homepage and HACCP and log graphs. A non-standard device is set during model
creation using Device Creator.
This procedure shows how to customise device settings. Custom settings can be propagated to other
devices of the same type or exported for future use.
1. Under Conguration Æ Site conguration select
the row in the table and click edit (pencil).
2. The line details are displayed, with the list of devices
connected. Click
corresponding to a device in
the table.
3. The Main device configuration page is shown.
4. Open the Alarms variable: set how often boss
Locale checks for device alarms.
5. Set the required settings for alarm monitoring
frequencies and other related features.
Note: to disable all the alarms for a device (except the
offline alarm) disable the device under Conguration
Æ Site conguration Æ Site and click
.
6. Open the page then the Log conguration page.
7. Click on the variables to be recorded and define the
log recording procedures.
8. Click Save: the configuration will be saved but is not
yet active.