Carel PlantWatch

3ODQW:DWFK
Cod. Carel. +030221221 – rel. 1.0 dated 20/02/01
30
 'HOHWHHYHQWORJ
ma2
Delete event log
Confirm: No

Confirming the corresponding field completely deletes the event/alarm log.
 'HOHWHYDULDEOHORJ
ma3
Delete variab. log
Confirm: No
Confirming the corresponding field completely deletes the variables log.
 5HVHWIUHHVSDFHLQGLFDWRU
ma3
Variables log
Free space indic.
Reset: No
Free space 93%
Confirming resets the free space indicator. After this operation the free space will be considered as 100%. In this way, the
memory full alarms are also reset. The data saved remains available for printing or downloading.
 3DUDPHWHUV!*HQHUDO
g1 g2 g3 g4
Installation name:
Technical department
Installation code: 1
Unit cnf. add: 1
IR32C
LT CABINET
Vegetables 1
Auto unit conf.
Start? No
-------------------
RS 485 baud rate
19200 Baud
g5 g6
Change password
1: 00001 User1
2: 00002 User2
3: 00003 User3
Status screen rotation
Disabled
 ,QVWDOODWLRQQDPH
This is a string of 20 characters that identifies the PlantWatch in text form. This name appears on all the reports, on the faxes, on
the main screen of the PlantWatch, and is also sent to the data processing centre during each connection.
 ,QVWDOODWLRQFRGH
The installation code is a number that uniquely identifies the installation; it is used, together with the LQVWDOODWLRQQDPH, by the
software on the computer in the data processing centre to identify the incoming calls. This number must coincide with the
address of the node configured on the MasterPlant.