Carel uChiller UCHBP00000200

37
ENG
µchiller +0300053EN rel. 2.2 - 14.12.2021
Initial con guration
4. apply the selected confi guration via NFC or Bluetooth. The refrigerant has now been correctly con gured.
High E ciency model
1. With Bluetooth devices, access the Service menu by clicking the icon at the bottom right (fi gure). With NFC devices, the
Service menu is already displayed by default (fi gure below);
Fig. 3.b
2. click “Set-up”--> “Confi gurations” -->”Defaults” (fi gure);
3. select the “BLDC Compressors” folder and then the compressor used on the unit;
4. apply the selected confi guration via NFC or Bluetooth. The refrigerant has now been correctly con gured.