Carel uChiller UCHBP00000200

39
ENG
µchiller +0300053EN rel. 2.2 - 14.12.2021
Initial con guration
3.2.4 Step 4 - Con gure parameter compatibility with mCH2 (Legacy model only)
1. click “Set-up”--> “Unit setup” --> “mCH2 parameters” and complete the confi guration of the unit
2. apply the parameters confi gured via NFC / Bluetooth to the controller.
3.2.5 Applica: date and time setting
Applica includes a feature for setting the date and time on Chiller in just one simple step, copying the values from the mobile
device.
Procedure:
1. open Applica on the mobile device;
2. access the controller via NFC or Bluetooth, entering your profi le credentials;
3. access the menu on the command bar at the top left;
4. select “set date/time”:
5. confi rm;
6. with an NFC connection, move the device near to the user terminal to write the copied values.
Notice: with a Bluetooth connection, the values are copied on confi rmation.