BT2 user manual - H-5911-9004-02-B Page | 16
The Project window opens.
Enter a Project Name. Enter the Surveyor and any Notes as required.
5.2.2 Import design holes
To import holes into the project, select the Holes tab, then Import.
The Browse window appears. Navigate to find the file containing the design holes. These may be in the form of a
standard ASCII text file such a *.TXT or *.CSV file, or else a Carlson *.DRL file.
Figure 4 New project window
Figure 5 Project window > Holes tab
To Next Page
Loading...
