SP5014TRX MACHINE MAINTENANCE
25
Clean out Poly Chain® Guard by removing
bottom portion of guard weekly. Chip
build up will wear Poly Chain® Belt.
Grease boom pivot monthly, swing cutter
wheel to the right to access grease fitting.
Use Texaco® Starplex II grease. DO NOT
OVER GREASE.
Grease bottom pivot bearings monthly. Use
Texaco® Starplex II grease. You cannot
over grease this area all parts are heat-
treated.
Grease track rollers daily. Use Texaco®
Starplex II grease. You cannot over grease
this area all parts are heat-treated.
To Next Page
Loading...