Carrera impel - Error Code Table

EN-26Halfords Carrera Impel
9.3. Error code table
Ifyoure-bikeisequippedwithLCDCompactEXoryouuseyourphoneasane-bike
display, the error code shows on the screen when a system error is detected. You can
check the recommend action below for basic troubleshooting. If the error still exists,
contact your nearest Halfords store for service.
Code Category Error Details Troubleshooting
16
Torquesensor
Torquesensorvoltagetoohigh Check the sensor cable connection
17 Torquesensorvoltagetoolow Check the sensor cable connection
32
Motor
Motor voltage too high Check the motor cable connection
33 Motor voltage too low Check the motor cable connection
34 Motor hall U phase malfunction Check the motor cable connection
35 Motor hall V phase malfunction Check the motor cable connection
36 Motor hall W phase malfunction Check the motor cable connection
37 Phase U malfunction Check the motor cable connection
38 Phase V malfunction Check the motor cable connection
39 Phase W malfunction Check the motor cable connection
40 Motor temperature too high Stop riding for 10 minutes
48
Speed sensor
No speed signal Check the motor cable connection
49 No cadence signal Check the sensor cable connection
64
Battery
Battery voltage too high Remove and place the battery back
65 Battery voltage too low Charge the battery
66 Low battery capacity Charge the battery
67 Flat battery Charge the battery
68 Charging temperature too high
Move to an area with
proper temperature
69 Battery cell temperature too low
Move to an area with
proper temperature
70 Battery cell over temperature Contact your nearest Halfords store
71 Battery over discharged Contact your nearest Halfords store
72 Battery over charged Contact your nearest Halfords store
73 Battery over discharged error Contact your nearest Halfords store
74 Battery over charged error Contact your nearest Halfords store
80
Controller
Controller temperature too high Stop riding for 10 minutes
81 Battery communication fail Contact your nearest Halfords store
82 Pedal rotation blocked Reboot the e-bike system
83 Handle rotation blocked Contact your nearest Halfords store
84 Controller communication fail Contact your nearest Halfords store
85 High side FET of U phase malfunction Contact your nearest Halfords store
86 Low side FET of U phase malfunction Contact your nearest Halfords store
87 High side FET of V phase malfunction Contact your nearest Halfords store
88 Low side FET of V phase malfunction Contact your nearest Halfords store
89 High side FET of W phase malfunction Contact your nearest Halfords store
90 Low side FET of W phase malfunction Contact your nearest Halfords store