Carrera impel - Battery Handling Instructions; Battery Safety Instructions; Battery Technical Data

EN-5Halfords Carrera Impel
4. Battery handling instructions
⚠
CAUTION
This Carrera e-bike is powered by a Lithium-Ion (Li-Ion) battery. Always read and
adhere to the instruction manual before handling or charging the battery or when using
the e-bike.
⚠
WARNINGS
• If your battery or charger exhibits any signs of damage, do not use the bicycle and
immediately bring it to your nearest Halfords store for inspection.
• Always turn o the e-bike system when not in use and/or when working on it.
• Always remove the battery during maintenance.

4.1. Battery safety instructions
Item Specication
Product model BS-A370 BS-A500
Nominal capacity 10.2 Ah 13.8 Ah
Energy 367.2 Wh 496.8 Wh
Rated voltage 36V
Operating temperature -10°C(14°F)to60°C(140°F)
Storage temperature
1month-20°C(-4°F)to50°C(122°F)
3months-20°C(-4°F)to40°C(104°F)
1year-20°C(-4°F)to20°C(68°F)
Permitted charging
temperature range
0°C(32°F)to45°C(113°F)
Protection rating IPX4
Weight, approx. 2.6kg(5.7lbs) 2.5kg(5.4Ibs)
4.2. Technical data of the battery
• Donotallowthebatterytosu󰀨eranymechanicalorphysicalimpactsormakeany
internalmodications.
• Iftheareawherethebatteryisinstalled(downtube)hasanyvisibledamage,donot
continueusingthee-bike;otherwise,therewillbeariskofexplosionorreandmay
result in severe injuries or death.
• Ifthebatteryuidleakedoutduetodamageorimproperusage,avoidtouchingthe
leakedbatteryuid.Ifyouaccidentallytouchedthebatteryuid,pleasecleanwith
largeamountsofwaterimmediately.Ifthebatteryuidcameincontactwithyoureyes,
pleaseseekfurtherhelpfromphysicians.Leakingbatteryuidsmaycauseburnsor
irritations to the skin.
• Store the e-bike in a dry and well-ventilated environment; keep the e-bike away from
humid environments and water sources for battery safety.
• Keep the battery charging socket away from the contact of paper clips, coins, keys, nail
clippers, screws, or other objects that can generate metallic attraction, to avoid a short
circuit between the poles.