Carrier 50CO Series - Documents; 3 Safety Instructions; 4 Warranty; 5 Storage of Equipment

2 - RECEIPT OF GOODS
2.3 - Documents
The following documents should be inside the unit:
- Instruction manual.
- Control manual.
- Unit wiring diagram
- Key to the wiring diagram.
- Dimensional drawing with connection diagram
- Additional diagrams depending on options.
3 - SAFETY INSTRUCTIONS
Appropriate PPE (personal protection equipment)
is required for any servicing operations on the units
Warning
The unit must be installed and maintained by a qualified, experienced technician. Follow the operating precau
-
tions to the letter when working on the unit.
Labels have been placed on the unit to remind you of the safety instructions.
As a general rule, follow all applicable safety regulations and standards.
4 - WARRANTY
See the general terms and conditions of sale
5 - STORAGE OF EQUIPMENT
The unit must be stored in a dry, sealed area, away from moisture and frost. The temperature in this area must not exceed 50°C .
6 - HANDLING
The unit must be handled either with a pallet truck or using a spreader beam and slings. This operation must be carried out by qualied
personnel. Refer to the information given on the relevant label on the unit.
Important: The unit must be handled with care and kept upright.
In all cases, the unit must be raised by its base.
Handling with a pallet truck
=
=
4