Carrier 50CO Series - Weights and Dimensions; 7 Supply Air Type

6 - HANDLING
Handling with a spreader beam and slings
1100
2500 mini
To be removed while handling,
then replaced once the unit is in
place
If the unit is lifted using a spreader beam and slings:
- Protect the panels.
- First remove all the caps covering the holes for the tubing on the lower section of the equipment.
- Use tubing (Ø max. = 40mm) with a su󰀩cient lifting capacity (see weight table).
- Use fabric slings.
6.1 - Dimensions and weights
SIZE
Dimensions
H x W x D
Weight (kg)
W40 1990 x 1190 x 890 350
W53 1990 x 1520 x 890 385
W78 1990 x 2070 x 890 545
W100 1990 x 2620 x 890 635
W115 1990 x 3000 x 890 730
7 - SUPPLY AIR TYPE
3 supply air types:
Fitting UNDER
Return air above supply air
underneath
Fitting OVER
Return air on front, supply air
above except W115
Return air underneath, supply
air above except W115
5