ERV & HRV: User and Installer Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
12
Synchronize the ventilator to the AHU using the following connections:
A210005
Fig. 20 – Infinity®/Evolution™ Ventilator to AHU Wiring
This will close the connection between R and G which will turn on the
blower in the AHU when the blowers in the ventilator come on.
It is important to have the AHU and the ventilator synchronized for the
T-2, T-3, T-4 and T-5 duct configurations.
WIRING DIAGRAM
Refer to Fig. 21 on next page.
WARNING
!
- Risk of electric shocks. Before performing any maintenance or
servicing, always disconnect the unit from its power source.
- This product is equipped with an overload protection (fuse). A
blown fuse indicates an overload or a short-circuit situation. If
the fuse blows, unplug the product from the outlet. Discontinue
using the unit and contact technical support.
To Next Page
Loading...
