Lighting
You can adjust the backlighting contrast, turn off backlighting alto-
gether, or turn off the HEAT and COOL status lights (LED)s.
1 Flip down the door near the base of the Infinity TM Control.
2 Press the ADVANCED setup button.
3 Press the RIGHT button once to select the LIGHTING screen (2
of 7).
4 With the BACKLIGHT text highlighted, use the TIME (+\-) button to
turn the screen's constant, low intensity backlighting ON or OFE
5 Use the SCROLL button to highlight HEAT/COOL LED
INDICATORS text.
6 Use the TIME (+\-) button to turn the HEAT and COOL LEDs on
or oft
7 Use the SCROLL button to highlight CONTRAS]_
8 Use the TIME (+\-) button to increase or decrease the screen's
contrast level.
9 Press the LEFT or RIGHT side buttons to select another
ADVANCED feature.
- OR -
10 To exit, push the ADVANCED button or simply close the door.
You may exit at any stage during this setup.
NOTE You con exit Advonce Setup ot ony time. When exiting,
you wifl be prompted to sove chonges if you hove mode ony
Select "YES" to sove your chonges, "NO" to revert hock to
previous settings.
To Next Page
Loading...
