Carrier Infinity Control - Basic Setup

This guide provides the basic operations ,For setting up and
operating your Infinity TM Control
Set Day, Time & Desired Humidity
1 Flip down the door at the base of the
Infinity TM Control.
2 Press the BASIC button.
3 Adjust the highlighted HOUR setting
using the TIME (+\-) button.
4 Press SCROLL to highlight MINUTE.
DDDD
1' 2Eo 2
5 Adjust the MINUTE setting using the TiME (+\-) button.
6 Press SCROLL to highlight DAY
7 Adjust the current DAY setting, using the TiME (+\-) button.
until the correc[ day is dispiayeo_
8 Press SCROLL to highlight HUMIDIT_I
9 Press the red HEAT button to set the heating humidity.
10 Adjust the desired heating humidity using either (+\-)
button.
11 Press the blue COOL button to set the cooling humidity.
12 Adjust the desired cooling humidity using either (+\-)
button.
13 Press BASIC or close the door to exit.
Adjust Heating Temperature
1 Press the red HEAT button. Heating is confirmed when the
red LED adjacent to the red HEAT button is lit.