[ ]: Model dependent. If the indoor unit has no this function, it
will not display.
Turbo function (on some models)
Under COOL/HEAT mode, press the FUNC. button to activate
the turbo function. Press the button again to deactivate the
turbo function. When the turbo function is activated,the “ ”
mark appears.
Press FUNC. to select whether the room temperature is detected at the indoor
unit or the wire controller.
Follow me function indicator
The select function icon will flash, then press the Confirm
button to confirm the setting.
*
EMERGENCY HEAT function (on some models)
In heating operation, for the units with electric heating feature,
press this button to activate electric heating mode. When the
EMERGENCY HEAT function is activated, the “ ” mark appears.
NOTE: The electric auxiliary heating function of the AHU model is switched
by the MODE button , and the FUNC. button is a turbo function.
**
*
*
*
*
*
*
*
*
*
*
*
To Next Page
Loading...
