62-11491 14
FUNCTION CHANGE
1. Press the FUNCTION key.
2. Press the ENTER key to select the desired function to change.
3. Press either the UP or DOWN arrow key until the desired Function
setting is displayed.
Function changes will change the operation of the unit.
4. Press the ENTER key to select.
Functional Parameters may be locked depending on your
fleet requirements.
The Function Parameters control selected operating features of the unit.
When multiple choices are available, the display will show the function
description on the left side with the corresponding function choice on the
right side.
When a function parameter is displayed, the data choice can be changed by
pressing the ENTER key and then pressing either the UP or DOWN arrow
keys. The displayed choice will then flash to indicate that the choice has not
been entered. Depress the ENTER key to activate the new choice. The
display will stop flashing to indicate that the choice has been entered.
BOX TEMPERATURE
AUTO START/STOP
I
UNIT DATA
PRETRIP
ALARM/FAULT
STANDBYBUZZER OFF
MAN
DEFROST
CITY
SPEED
ROAD
FUNCTION
ENTER
SETPOINT
O
i
DEFR 12.0 H
COMPARTMENT 1 COMPARTMENT 2 COMPARTMENT 3
To Next Page
Loading...
