62-11491 16
UNIT DATA
1. Press the UNIT DATA key to scroll through the data list one item at
a time.
2. To scroll through the list faster, use the UP or DOWN arrow keys.
3. The data will display for 5 seconds.
4. Press the ENTER key to display data for 30 seconds.
5. The display will revert back to the default display if no keys are
pressed for 5 seconds.
The UNIT DATA key can be used to display the microprocessor input data
values. The display will show the description of the input on the left side
with the actual data on the right side.
BOX TEMPERATURE
AUTO START/STOP
I
UNIT DATA
PRETRIP
ALARM/FAULT
STANDBYBUZZER OFF
MAN
DEFROST
CITY
SPEED
ROAD
FUNCTION
ENTER
SETPOINT
O
i
SUCT 25P
COMPARTMENT 1 COMPARTMENT 2 COMPARTMENT 3
To Next Page
Loading...
