Carrier TOUCHPILOT 30KAV - Touch Pilot Operation and User Settings; Unit Start;Stop and User Login; Password Management

12
5.4 - Unit start/stop
With the unit in the Local off mode:
To display the list of operating modes and select the required
mode, press the Start/Stop button in the upper-right
corner of the Synoptic screen.
IMPORTANT: When entering the menu, please note that
the currently selected item corresponds to the last running
operating mode.
Unit start/stop screen (operating modes):
Local On Local On: The unit is in the local control mode and allowed
to start.
Local
Schedule
Local Schedule: The unit is in the local control mode and
allowed to start if the period is occupied.
Network Network: The unit is controlled by network commands and
allowed to start if the period is occupied.
Remote Remote: The unit is controlled by external commands and
allowed to start if the period is occupied.
Master Master: The unit operates as the master in the master/slave
assembly and allowed to start if the period is occupied.
To start the unit
1. Press the Start/Stop button.
2. Select the required Machine Mode.
3. The Welcome screen will be displayed.
To stop the unit
1. Press the Start/Stop button.
2. Conrm the unit shutdown by pressing Conrm Stop or
cancel the unit shutdown by pressing the Back button.
5.5 - Display settings
The User Login screen allows the user to do the following:
• Gain access to more control options.
• Select the language of the controller.
• Change the system of measurement (imperial or metric).
To access the User Login screen, press the Login button
in the upper-right corner of the Synoptic screen.
1. Cursor indicating the selected language
2. Logged-in button
3. Logged-o button
4. Password dialogue box
5. System of measurement: Metric/Imperial
NOTE: You may also leave the screen by pressing the Back
button. Your changes will be saved.
5.5.1 - User login
Only logged-in users can access congurable unit parameters.
By default, user password is “11”.
To log in as user
1. Press the Login button to open User Login Screen.
2. Press the Password box.
3. A dialogue box appears. Provide the password (11) and
press OK.
4. The User Login screen appears.
5. Press the Logged-in button to save your changes or
the Logged-off button to exit the screen without making
modications.
5.5.2 - Password change
User password can be modied in the User Conguration
menu.
To change your password
1. Go to the Main Menu.
2. Navigate to the Conguration menu (logged-in users
only) and select User Conguration (USERCONF).
3. Select the User Password box and provide your new
password.
4. Press OK. The User Conguration screen appears.
5. Press the Save button to save your changes or the Cancel
button to exit the screen without making modications.
1
2
4
5
3
Security access settings
• User-level security ensures that only authorised
users are allowed to modify critical unit parameters.
• Only logged-in users are allowed to access
the Conguration menu.
• It is strongly recommended to change the default
password of the user interface to exclude
the possibility of changing any parameters by
an unqualied person.
• Only people qualied to manage the unit should be
familiarized with the password.