Carrier TOUCHPILOT 30KAV - Interface Display and Measurement Settings; Language and Measurement Unit Selection; Main Menu Navigation

13
5.5.3 - Display language
Display language can be modied in the User Login Screen
on the user interface.
To change a display language
1. Press the Login button to open User Login Screen.
2. Select the new language of the display.
3. Press the Logged-in button to save your changes or
the Logged-off button to exit the screen without making
modications.
Language list selection
The control provides two different language lists which means
that languages displayed in the User Login screen may vary
depending on user preferences (“Language list” parameter
in USERCONF - User Conguration).
Language list (in USERCONF menu) set to “1”:
English, Spanish, French, German, Dutch, Turkish, Italian,
Portuguese, Russian and “other” (custom language).
Language list (in USERCONF menu) set to “0”:
English, Spanish, French, German, Dutch, Chinese, Italian,
Portuguese, Russian and “other” (custom language).
Custom language
The control system allows users to add new languages to the
control. To learn more about language customization, please
contact your local Carrier service representative.
NOTE: Custom languages can be uploaded only by Carrier
service technicians.
5.5.4 - System of measurement
The control offers the possibility of selecting the system of
measurement displayed on the user interface (metric /
imperial).
To change a system of measurement
1. Press the Login button to open User Login Screen.
2. Select the system of measurement (metric or imperial).
3. Press the Logged-in button to save your changes or
the Logged-off button to exit the screen without making
modications.
5.6 - Main menu
The Main menu provides access to the main control
parameters, including general parameters, inputs and outputs
status, etc.
• To access the menu, press the Main menu button
located in the upper-left part of the Synoptic screen.
• Specic unit parameters can be accessed by pressing
the icon corresponding to the desired category.
• To go back to the Synoptic screen, press the Home button.
General parameters screen
The General parameters screen provides access to a set of
general unit parameters.
• To access the General parameters screen, go to the Main
menu and select General Parameters (GENUNIT).
• Press the Up/Down buttons to navigate between the
screens.