Carrier TOUCHPILOT 30KAV - Touch Pilot Interface Navigation; Interface Overview and Buttons

9
If the touch screen is not used for a long period of time,
the Welcome screen is displayed, and then it goes blank.
The control is always active and the operating mode remains
unchanged.
Press anywhere on the screen and the Welcome screen will
be displayed.
4 - HOW TO USE TOUCH PILOT USER INTERFACE
4.1 - User interface
Touch Pilot is a 7 in. colour touch screen with quick display of
alarms, current unit operating status, etc. It allows for web
connectivity and custom language support (control parameters
displayed in the language selected by the user).
Touch Pilot: Welcome screen for 30KAV units
4.2 - Touch Pilot buttons
HOME SCREEN
Home button Main Menu button Back button
Home screen displayed Main Menu displayed Go back to the previous screen
Login button Start/Stop button Alarm button
Basic access
Unit is stopped
(grey icon)
No alarm active on the unit
User access
Unit is running
(green icon)
Blinking icon: Partial alarm (one
circuit aected by the alarm) or Alert
(no action taken on the unit),
Steady icon: Alarm(s) active on the
unit (see also section 9.6)
OTHER SCREENS
Login screen Parameters screen(s)
Login: Conrm advanced access login Save changes
Logout: Reset the user level access
and go to the splash screen
Cancel your modications
Force screen (override) Navigation buttons
Set force: Override the current command
(if possible)
Displayed when the menu includes more than one page:
Go to the previous page
Remove force: Remove the forced command
Displayed when the menu includes more than one page:
Go to the next page