ZS duct sensors
ZS Sensors Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation Guide All rights reserved
16
Duct Temperature Sensor
Available with:
• 4 in. (10.16 cm) probe
• 8 in. (20.32 cm) probe
• Back or bottom probe *
Duct Temperature/Humidity Sensor
Available with:
• 5.3 in. (13.5 cm) probe
• Back or bottom probe *
Duct Temperature Averaging Sensor
Available with:
• 8 ft (2.44 m) flexible probe
• 12 ft (3.66 m) flexible probe
• 24 ft (7.32 m) flexible probe
• Back or bottom probe *
* Sensors with back probes (as shown) are to be mounted on the outside of ductwork.
Sensors with bottom probes are to be mounted on the inside of ductwork.
To Next Page
Loading...
Need help?
General
