ZS Sensors Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation Guide All rights reserved
1
The ZS line of thermistor-based temperature sensors consist of:
• Zone sensors that may optionally sense humidity, CO
2
, VOC, or motion
• Duct sensors for sensing temperature, temperature/humidity, or averaging temperature
• A pipe temperature sensor
• An immersion sensor
• Outdoor air sensors for sensing temperature or temperature/humidity
ZS Sensors are wired to the Rnet on Open controllers.
The following table shows the ZS Sensor models, their features, and the available configurations.
ZS Standard
• No user control
• Temperature and humidity
• Temperature and VOC
• Temperature and CO2
• Temperature, humidity, and VOC
• Temperature, humidity, and CO2
ZS Plus
• Slide potentiometer to make the
zone warmer or cooler
• button to override the
schedule and put the zone in an
occupied state, or force the zone
to an unoccupied state
• Green LED to indicate occupied
state
• Local access port
• Temperature and humidity
• Temperature and VOC
• Temperature and CO2
• Temperature, humidity, and VOC
• Temperature, humidity, and CO2
To Next Page
Loading...
Need help?
General
